Sirio manufacture a very large range of base antennas for CB (and many other bands).

The build quality of their antennas is certainly far superior to those made in the UK.

You can check the full range of Sirio base antennas on their website by clicking here

NEW
Add to cart

The Sirio Monsoon is a new 10-11 meter base station antenna with a bottom tuning system, tunable between 26-30 MHz.

Big coil made of a 6mm diameter aluminium wire, AWG-3. Strong PC insulator with reinforcement fins. High power handling 1000 Watts (CW) continuous and 3000 Watts (CW) short time.

Including the well-known top anti-static cage. Low radiation angle for excellent DX.

Download Instruction Manual

Add to cart
New Version UPGRADED 2024
Gain-Master Hi-Tech Fibreglass Base Station Antenna for CB & 10m Band.

Gain-Master™ is a 5/8λ high tech fibreglass base station antenna for CB and 10m amateur band completely designed by electromagnetic simulation to achieve the maximum gain and optimize the radiation pattern and bandwidth.

Engineered with the most advanced available technologies it is completely manufactured in Italy with high quality materials.
The new design of the radiant element (Patent Pending) works like a central fed dipole so all RF currents on the radiator are in-phase and the ground plane radials are not necessary.
The coaxial coil at the bottom works like RF-choke for the optimum decoupling from mast and feeding line.
Made of telescopic fibreglass tubes, it is DC-grounded for the best protection from static discharges.

Gain-Master™ is the new reference standard in its class of antennas.

For full details: Gainmaster Brochure

Add to cart

A good quality basic 1/2 wave antenna with no groundplanes.

Made from non-corrosive aluminium, the telescopic tubes have plastic joining sleeves and are all secured with 2 screws.

The top section is adjustable for swr and also features an anti-static top hat.

Add to cart

A good quality 5/8 wave antenna with groundplanes.

Made from non-corrosive aluminium, the telescopic tubes have plastic joining sleeves and are all secured with 2 screws.

The top section is adjustable for swr and also features an anti-static top hat.

Add to cart

A good quality 5/8 wave aluminium  base antenna with open coil and ground planes.

The Tornado 27 is made of high strength drawn aluminium pipes of special alloy composition which guarantee a long life span, almost no corrosion, and extremely light-weight. It is supplied with jointing sleeves to guarantee a perfect water-proofing.

Download a copy of the instructions here

Add to cart

A very high quality 5/8 wave antenna with groundplanes. This is probably the best base antenna available.

Made from aluminium with Magnesium for better radio conductivity and maximum strength. This is certainly the strongest aluminium antenna available.

The large open coil prevents any build up of water or condensation and allows the antenna to handle high levels of RF power.

The top section is adjustable for swr, although in our experience there is usually no adjustment necessary.

Download a copy of the instructions here

Add to cart

A very high quality 5/8 wave antenna with 16 groundplanes.

Made from aluminium with Magnesium for better radio conductivity and maximum strength.

The top section is adjustable for swr, although in our experience there is usually no adjustment necessary.

Download a copy of the instructions here

Add to cart

A redesigned version of the Vector 4000, slightly smaller and with an anti-static cap.

Still the same "classic" design and still a very LARGE antenna, this new version should be a little stronger than the original.

Features:
- CB & 10m Base station antenna
- Omnidirectional
- Tunable by whip length adjusting
- High power handling capability
- Made of aluminium alloy 6063 T-832
- UP-GRADE: Lower radiation angle for the best DX, new tuning possibility

Download Full Specifications
Add to cart
Available to Order

A new version of the classic "starduster" style antenna.

Designed to sit on top of a 1.5-2" mast, alternatively you can use a FT-2 adapter bracket to mount it on any other size mast.

  • CB & 10m Base station antenna
  • Omnidirectional
  • Low radiation angle for excellent DX
  • High power handling capability
  • Made of aluminium alloy 6063 T-832
  • Tunable by whips length adjusting
  • Side mast mounting allowed by optional bracket FT-2
Add to cart
Indoor / Outdoor

A compact base antenna for use either in the loft or outdoors.

Don't expect the same performance as a larger antenna, but if you really can not mount an antenna outside then this is an alternative.

If used in the loft it will simply stand on it's "legs", if used outdoors it fits on the top of a standard mast (35-40mm diameter).

Download Instruction Manual

Add to cart

A full size 1/4 wave boomerang antenna, made of anti-corodal aluminium.

Don't expect the same performance as a larger base antenna, but this one is ideal for use on a balcony or where you can not mount a larger antenna.

These latest models have a longer ground radial - over 5ft long!  (approx 1.7m).

SWR is adjustable on the whip.

Add to cart

A reduced size 5/8 wave boomerang antenna, using a wound black fibreglass whip.

Don't expect the same performance as a larger base antenna, but this one is ideal for use on a balcony or where you can not mount a larger antenna.

These latest models have a longer ground radial - over 5ft long!  (approx 1.7m).

SWR is adjustable on the whip.

Add to cart

A good quality 3 element directional Yagi beam antenna for use on 27/28MHz.

Made of anticorodal aluminium with a strong boom and bracket.  All elements have plastic joining sleeves and are secured with 2 screws.

Coax connection is by a SO239 socket, which comes pre-mounted, and there is adjustment for swr by a Gamma Match System.

Certainly the best quality beam currently available for CB.

Download Instruction Manual

Add to cart
** Our carriers now have a £10 surcharge on this antenna **

A good quality 4 element directional Yagi beam antenna for use on 27/28MHz.

Made of anticorodal aluminium with a strong boom and bracket.  All elements have plastic joining sleeves and are secured with 2 screws.

Coax connection is by a SO239 socket, which comes pre-mounted, and there is adjustment for swr by a Gamma Match System.

Certainly the best quality beam currently available for CB.

Download Instruction Manual