10m Radios

A range of mobile 10m Amateur radios.

These radios are only legal for use by Radio Amateurs who hold an appropriate licence.

Although these radios can be converted to cover other frequencies for use in countries where these frequencies are permitted, conversion would make the radio illegal in the UK.

Click on the "more details" link for full manufacturers specifications. These specifications are subject to change and are those listed by the manufacturer at the time of us adding the radio to our website. Check with the manufacturer for current specs.

COMING SOON
email us to be put on our waiting list

A new high power Amateur transceiver covering 10m and 12m bands.

Maximum 80W output and all the features you could ask for.

Download the full brochure here:  President Washington Brochure

Add to cart
Latest version - new firmware

A new multimode radio with a classic look. The latest technology inside it, but a retro facia with bright chrome finish and an analogue s-meter.

This radio comes standard as a 10m radio (28.000-29.700MHz) but can be expanded to cover approx 24.8-30MHz in 12 bands including the UK 40.

There are many advanced features including NRC and adjustable echo. Many of these features can be adjusted using menus on the radio.

All the bands can be custom programmed with any frequencies and there are many other options that can be changed using the optional PC lead & software.

This radio now has improved firmware that includes being able to select 500Hz or 5kHz for the clarifier, full 5 decimal point programming to allow exact UK frequencies and ability to check the frequency using the LED display. 

Download User Manual

SOLD OUT - expected JUNE
NEW "PLUS" Version

The 7th generation K-PO DX-5000 Plus is the latest version of this fully featured amateur radio HF mobile transceiver which is pre-programmed the the 10m amateur band (28.000 - 29.700 Mhz) however you can unlock the export band without connecting to a PC (see below).  

New features on Version 7 (DX-5000 Plus):

  • VOX
  • CTCSS/DCS codes
  • RX compander
  • Noise gate
  • RX noise reduction (extra PCB inside the radio)
  • Microphone type selection: electret or dynamic
  • Program cable connector on the backside of the radio (program cable is optional)
  • Extra ventilation holes on the top and bottom cover

Inside the sleek black design of the DX5000 is an impressive array of features, including: 40w FM/SSB output (12w AM), dual frequency and channel display, 6 programmable bands, echo, scan, PA facility, RF gain, dual watch, time-out timer, voltage display, roger bleep, adjustable power, noise blanker and ANL, built in SWR meter, hi-cut filter and input voltage protection.

The radio has 6 bands of up to 60 channels that can be programmed for export purposes from 25.615 - 30.105.

Expanded for FREE
Add to cart
40W FM,  50W (PEP) AM

A high power mobile covering the 10m Amateur band (28-29.7MHz), on FM & AM (not SSB).

Despite it's "old school" appearance (with analogue meter) this radio is packed with features, accessed through a menu system, from variable power to built-in echo. One of the unique features is the ability to select either dynamic or electret mic input - the first time we have seen this on President radios. Have a browse through the instructions (link below) to see all the features.

The radio can also be expanded to cover 11m (only for use where permitted), and when expanded will cover from 24.715 - 30.105MHz.

The radio can also be set up to include both the UK and EU CB channels.

Please note, this radio is NOT legal to use on the CB channels in the UK because of it's high output power.

Download Instruction Manual

Add to cart
NEW VERSION 7 with Noise Reduction Circuit Board

Latest generation 10m multimode, that can be expanded to cover frequencies from 25.615 - 30.105 MHz where permitted.

BLUE channel display and BLUE frequency display.

Many of the features of the radio can be programmed by computer to give you a customised radio.

We can supply the radio ready programmed for whatever bands you prefer - but you must ensure that you only use the radio where your licence permits.  Because there are only 6 bands on the radio it can be programmed for either 10m (28-30mHz) or 11m (26-28mHz) but will not cover both at the same time.

Can be switched between 10m & 11m by key presses - without using software.

This is the latest version 7 pcb & software.

Latest version (rev.7) with completely new pcb, firmware & software.

New features includes:

  • NRC - Noise Reduction Circuit
  • VOX (hands-free transmit)
  • CTCSS/DCS
  • RX compander
  • TX Noise Gate
  • Micro type selection : electret or dynamic
  • Program cable connector on the rear panel
  • Extra ventilation
LAST FEW - phone to order
NEW 2023 VERSION with 5kHz steps

A new high power 10m mobile radio with a super large LCD display, offering all the features you could ask for in a mobile 10m radio.

The radio is PC programmable and can also be programmed for any frequencies from 25-30MHz (for use where allowed).

We will supply the radio pre-programmed for either 10m, 11m or both 10 &11m (please ask at time of purchase).

There is an optional PC lead & software available for an extra £14.95 at time of purchase (normal price £17.95 if bought without the radio).

The radio uses a "modular" type mic plug, but you can use a different mic on it by using one of our mic adapters (£8.95)

You can download a copy of the instructions here

SOLD OUT
Latest Version 4 with DTMF & 12m

A new high power compact 10m mobile radio, offering all the features you could ask for in a compact design ideal for mobile DX.

This latest version can now be programmed from 24.880MHz, allowing you to use it on 12m as well as 10m & 11m. Earlier versions could only be programmed from 25MHz upwards.

The radio is PC programmable and can also be programmed for any frequencies from 24.880MHz-30MHz (for use where allowed).

We will supply the radio pre-programmed for either 10m, 11m (CB) or all bands 10m, 11m & 12m (please ask at time of purchase).

There is an optional PC lead & software available for an extra £14.95 at time of purchase (normal price £17.95 if bought without the radio).

Please note that the latest version of the software is v.3, this is the software for use with v.4 of the radio.

Add to cart

New Dual Band 10m & 12m

Note: these are a 10m/12m Amateur radio, and although they can be expanded to cover CB channels it in not legal to operate them on any CB channels.

The latest version of the Lincoln II is now called the Lincoln II + and now covers the 12m band as well as 10m.
The other major change is that this new version is now PC programmable, using the mini USB socket on the rear, allowing you to change various features on the radio. The power output has also been increased slightly.

The radio is all mode (AM/FM/SSB/CW) and covers the full 10m band as standard (28.000 - 29.700MHz) plus 12m (24.880 - 24.990MHz). It can be expanded for continuous coverage of 24.715 - 30.105MHz, this is for export use only and is not legal in the UK. We can supply is expanded for no extra cost.

Advanced features include CTCSS and many options that can be programmed through the menus.

Click on the "more details" link for full specs.

Download Instruction Manual

Add to cart

A new more compact PC programmable multimode radio for 10m from this well known supplier. Similar in features to the DX-5000 etc but this radio just feels better quality all round.

Previously sold as the Alinco DR-135DX, this is the same radio but is now called the DX-10.

The radio is a standard DIN size, making it easier to fit in any vehicle with a spare radio slot.

The radio comes pre-programmed for 10m, but can be programmed with any channels from 25-30MHz.

PC lead & software are available @ £14.95 when bought with the radio.

Alinco DR-135 / DX-10 / CRE-8900 PC Programming Lead

Add to cart

PC Programming lead & Software for use with the Alinco DR-135 & Alinco DX-10 and CRE-8900 radios.

The same lead fits all versions of these radios, BUT the software is different for each model and each firmware version.

Please make sure you download the correct version, otherwise it will not work with your radio.

SOLD OUT - discontinued

A high power mobile covering the 10m and 12m Amateur bands, on FM & AM (not SSB).

Despite it's simple appearance this radio is packed with features, accessed through a menu system, from variable power to built-in echo. One of the unique features is the ability to select either dynamic or electret mic input - the first time we have seen this on President radios. Have a browse through the instructions (link below) to see all the features.

The radio can also be expanded to cover 11m (only for use where permitted), and when expanded will cover from 24.715 - 30.105MHz.

Please note, it does NOT cover the UK CB Channels.

Download Instruction Manual

SS6900, SS7900, AT5555, DX5000 PC Programming Lead (Older Models without socket on back)

New Lower Price
Add to cart
For older models with connection INSIDE the radio.

PC Programming lead for use with various radios that have the PC connection inside the radio on the circuit board.

Allows you to program any channels from 25-30MHz and access to various advanced features, such as programming of the roger bleeps.

The lead will fit the following radios, please select the software you need from our download page:

SS-6900, SS-6900N, SS-7900, AT-5555, AT-6666, DX-5000, HR-5500 (not SS-6900V nor DX-5000-PLUS).

We also offer a discount if you buy the lead at the same time as the radio (select the "with lead" option when buying the radio).

CRT SS-9900 PC Programming Lead

Add to cart

PC Programming lead for use with the CRT SS-9900 radio.

Also now used on the SS-6900V and SS-7900V.

Allows you to program any channels from 25-30MHz and access to various advanced features, such as programming of the roger bleeps.

Software available for versions 1,2,3, & 4 of the radio.

CRT SS7900 & CRT 2000 Mic Adapter

7900X
Add to cart

A microphone adapter to allow you to use a standard 4 pin microphone on the CRT SS7900 and CRT 2000 radios that have a modular type mic socket on them.

Available in 4 pin Uniden, 4 pin Cybernet or 6 pin Midland/President wiring.