Microphone Leads

A range of replacement curly leads, extension leads, and cross-over adapters.

Standard Replacement Lead (4 core)

L14
Add to cart

A standard replacement curly mic lead.

4 wires + shield

Extra Long Replacement Lead (6 core)

L16
Back in Stock
Add to cart

An extra long replacement curly mic lead, approx half as long again as the one found on an average mic.

Length will be listed as either 3m or 10ft - either way this would be if the lead was stretched out straight, which is never going to happen.

Available with 5 wires + shield.

Replacement Mic Lead with 4 Pin Plug Fitted

L14P
SOLD OUT

A standard 4 core replacement microphone lead with a 4 pin plug fitted on one end (wired Uniden but you can soon rewire it).

Replacement Mic Lead with 5 Pin DIN Plug Fitted

L14D
Add to cart

A 4 core replacement microphone lead with a 5 pin push-in DIN plug fitted on one end.

Note, this lead is thinner than used on most mics (more like the thickness on Astatic mics).

Thin Replacement Lead

L24
Add to cart

A thinner than normal replacement curly mic lead.

Designed as a replacement lead for some of the smaller mics - such as the one on the Midland 77-095 etc.

Available in 4-wire only (3 + shield).

The picture shows it on the left next to a standard lead for comparison.

Speaker/Mic Replacement Lead

L27
Add to cart

A replacement lead for a speaker/mic complete with a fitted 2-pin plug (2.5mm + 3.5mm).

Different versions are available to order - some with stereo 3.5mm plugs and some mono.  State your requirements when ordering.

Add to cart

A shielded straight microphone cable, for making up extensions or adapters.

4 cores plus an overall lapped screen.

Outer cover is GREY.

This cable is thicker (approx 7mm) than the ones below which have more cores.

Price is per metre.

More details
Add to cart

A shielded straight microphone cable, for making up extensions or adapters.

4 or 6 or 10 cores plus an overall lapped screen.

This cable is much thinner than the 4 core cable above, the 6 core is approx 4mm and the 9 core approx 5.5mm.

Price is per metre.

More details

Microphone Extension Lead

Add to cart

A curly microphone extension lead, with a socket on one end and a plug on the other.

Available in 4, 5, 6, 7, and 8 pin.

(4,5, 6 & 8 pin are curly leads, the 7 pin is straight cable).

Microphone X-Over ( changeover )

Please call us to check whether we can make a particular lead & to order.  Online ordering is not available for this item.

We can make up cross-over leads for most radios - to allow you to use your mic on 2 different radios.

Just let us know what the mic is wired for and what radio you would like to plug it into, and we will make the adapter to suit.

Note:  these leads are for use on CB Radios only, we do not make them for Amateur radios

CRT SS7900 SS8900 & CRT 2000 Mic Adapter

7900X
Add to cart

A microphone adapter to allow you to use a standard 4 pin microphone on the CRT SS7900, SS8900 and CRT 2000 radios that have a modular type mic socket on them.

Available in 4 pin Uniden, 4 pin Cybernet or 6 pin Midland/President wiring.

CRT Milenium (RJ12) Mic Adapter

MILLX
Add to cart

A microphone adapter to allow you to use a standard 4 pin microphone on the CRT Milenium radio that has a modular type mic socket on them.

These are a smaller

Available in 4 pin Uniden, 4 pin Cybernet or 6 pin Midland/President wiring.